undefined

Thickness-independent fracture in columnar freshwater ice : An experimental study

Publiceringsår

2024

Upphovspersoner

El Gharamti, Iman; Ahmad, W.; Puolakka, O.; Tuhkuri, J.

Abstrakt

<p>Experiments on columnar freshwater ice indicated that there is no detected effect of the ice thickness on the fracture behavior of columnar freshwater S2 ice. The influence of thickness was studied using large laboratory-grown samples. Two series of Mode I fracture tests were carried out using deeply edge-cracked 3-by-6-metre rectangular plates loaded monotonically at 1…100 μm/s. The ice was warm (above −0.5 °C), and the ice thickness varied in the range 10–40 cm. This paper analyzes the second series of tests and compares the results with the first series tests; the analysis of the latter was published in Gharamti et al. (2021) [2,3,4]. The viscoelastic fictitious crack model (VFCM) was applied to analyze the data and calculate the crack profile, fracture energy and the process zone size. The thickness affected only and linearly the values of the measured loads with no influence on the fracture properties: the apparent fracture toughness, fracture energy, crack opening displacements, notch sensitivity and process zone size.</p>
Visa mer

Organisationer och upphovspersoner

Aalto-universitetet

Gharamti Iman

Tuhkuri Jukka Orcid -palvelun logo

Puolakka Otto

Ahmad Waqas Orcid -palvelun logo

Publikationstyp

Publikationsform

Artikel

Moderpublikationens typ

Tidning

Artikelstyp

En originalartikel

Målgrupp

Vetenskaplig

Kollegialt utvärderad

Kollegialt utvärderad

UKM:s publikationstyp

A1 Originalartikel i en vetenskaplig tidskrift

Publikationskanalens uppgifter

Volym

298

Artikelnummer

109906

Publikationsforum

55271

Publikationsforumsnivå

2

Öppen tillgång

Öppen tillgänglighet i förläggarens tjänst

Ja

Öppen tillgång till publikationskanalen

Delvis öppen publikationskanal

Licens för förläggarens version

CC BY

Parallellsparad

Ja

Övriga uppgifter

Vetenskapsområden

Maskin- och produktionsteknik; Materialteknik

Nyckelord

[object Object],[object Object],[object Object],[object Object]

Förlagets internationalitet

Internationell

Språk

engelska

Internationell sampublikation

Nej

Sampublikation med ett företag

Nej

DOI

10.1016/j.engfracmech.2024.109906

Publikationen ingår i undervisnings- och kulturministeriets datainsamling

Ja