Data from ice tank tests with vertically sided structures collected during the SHIVER project
Beskrivning
Basin tests were performed at the Aalto Ice Tank to gather data on ice action and ice-structure interaction. A real-time hybrid test setup was mounted to a carriage on a bridge spanning the ice tank. A vertically sided cylindrical pile was moved through the ice by moving the carriage along the bridge. The dynamic response to the measured ice loads was simulated by the real-time hybrid test setup for a range of test structures including offshore wind turbines, a series of single- and multi-degree-of-freedom oscillators, the Norströmsgrund lighthouse and the Molikpaq caisson structure. In addition, ice loads were measured in forced vibration tests and while moving the rigid pile through the ice with a constant speed. A full description of the data and experimental design has been published in Data in Brief, see the project references. For questions about the data contact Hayo Hendrikse (h.hendrikse@tudelft.nl).
Visa merPubliceringsår
2025
Typ av data
Upphovspersoner
4TU.ResearchData - Utgivare
Department of Energy and Mechanical Engineering
Hayo Hendrikse - Upphovsperson
Kees Van Beek - Upphovsperson
Marnix van den Berg - Upphovsperson
Nick J.J. Ebben - Upphovsperson
Otto Puolakka - Upphovsperson
Tim Hammer - Upphovsperson
Tom Willems - Upphovsperson
Delft University of Technology - Medarbetare
Projekt
Övriga uppgifter
Vetenskapsområden
Maskin- och produktionsteknik
Språk
Öppen tillgång
Öppet